Name: Soudal Grip All Adhesive - Solvent Based
SKU: 1279295

Product Details ＋

Soudal Grip All Solvent Based is an Ultra Strong, Gap Filling Solvent-Based Grab Adhesive with Soudal's unique Reinforced Bonding Technology. Soudal Grip All Solvent-Based has a High Initial Grab (125kg/m²) and is compatible with most building materials, porous and non-porous.

Soudal Grip All Solvent Based is used for the bonding of heavy materials such as wooden skirting boards, window sills, plaster, plasterboard, carpet grippers and much more. However, it should not be used on materials sensitive to solvents such as polystyrene, use instead.

Supplied in 290ml Cartridges.

Description

Soudal Grip All - Solvent Based

Soudal Grip All Solvent Based is an Ultra Strong, Gap Filling Solvent-Based Grab Adhesive with Soudal's unique Reinforced Bonding Technology.

Soudal Grip All Solvent-Based has a High Initial Grab (125kg/m²) and is compatible with most building materials, porous and non-porous. This high performance adhesive replaces the need for mechanical fixings (screws & nails) and is moisture resistant.

Product Benefits:

Solvent Based Construction Adhesive
High initial grab (at least 125kg/m², full surface bonding) for fast and direct bonding.
Gap Filling Properties.
Fast strength build up.
Replaces nails and screws.
Suitable for use on porous and non-porous surfaces.
Reinforced Bonding Technology.

Typical Applications:

Bonding of heavy materials such as wooden skirting boards, window sills, plaster, plasterboard.
Bonding of carpet grippers, edge strips and stair nosings.
Bonding of wall and floor boards, window frames and partitions.
Repair of loose tiles.

Application

Surface Preparation:

Surfaces should be clean, dry and free of dust. Prime if the surface is too porous.

Application Method:

Apply the adhesive by means of a onto one surface in strips or dabs.

Always apply adhesive to the edges and corners of panels. Press the surfaces together immediately and tamp down with a rubber hammer. Support may be required on a vertical fixing or for heavy components.

For the bonding of impervious or heavy materials use the transfer method: press components together and release for max. 5 min. Return parts together and batten down with a rubber hammer.

If necessary support until adhesive is completely cured (approx. 24-48 hours).The bond can be loaded after 24-48 hours.

Remarks:

When bonding, the pressure applied determines the initial grab and the final bonding strength. The duration during which pressure is applied is less important.
In case of overhead applications a combination with mechanical fixing is required.
Do not use as a mirror adhesive.
Do not use in applications where continuous immersion is possible.